SLITTING
HOACO rotary die cutting machines offer multiple slitting options. Choose the one that best matches your material, required slitting accuracy and cut type (through cut or kiss cut) for tapes, foam, films, paper and other flexible roll materials.
RAZOR SLITTER
A simple slitting solution that uses snap-off blades. Each blade is clamped in a blade holder, and holders can be added or removed as needed and locked in place with screws. The position and angle of each holder are adjustable, with a minimum spacing of 15 mm. The W250 model accepts up to 17 blade holders and the W350 up to 23. Through cut only.
RING-TYPE SLITTING DIE
Blades are machined on removable rings, and the number of rings can be adjusted as needed. Bearings at the shaft ends let the rings rotate freely with the material as it advances. This rolling cut produces cleaner edges with fewer burrs. Minimum spacing is 10 mm. Both through cut and kiss cut are available.
PNEUMATIC SLITTING DEVICE
The pneumatic slitting device uses compressed air to drive the blade, with air cylinders controlling blade lowering, lifting and cutting pressure to slit roll materials. It suits tapes, foam, films, paper and other flexible materials, and blade pressure can be adjusted to the material’s thickness, hardness and slitting requirements. It is easy to operate, responds quickly and offers flexible pressure adjustment. Used together with a rotary die cutting machine, it enables continuous in-line slitting, improving efficiency and slitting consistency. Minimum spacing is 20 mm.Through cut only.
SOLID SLITTING DIE
Slitting blades are machined directly into the rotary die, and the material is slit by the die’s rotating action. Running in sync with the die cutting process with fixed cut positions, this method offers stable operation and reduces lateral drift and width variation compared with pneumatic slitting devices, ensuring slitting accuracy and product consistency. It is especially suited to products with tight requirements on slit width, cut position and process stability, and is widely used for tapes, foam, films and precision die cutting.
НА ЗАКАЗ
РЕШЕНИЯ
Мы понимаем, что каждая производственная линия уникальна. Наша команда инженеров тесно сотрудничает с вами, чтобы разработать индивидуальные решения для ротационной высечки, адаптированные к вашим конкретным потребностям:
- Многопозиционная высечка (объединение операций продольной резки, ламинирования и высечки в одной линии)
- Интеграция лазерной высечки для изготовления сложных форм (отсутствие затрат на изготовление штампов при небольших тиражах)
- Системы линейного контроля (система контроля качества 100% с использованием камер машинного зрения)
- Специализированные технологии обработки материалов (удаление статического электричества, антиадгезионная обработка, корона-обработка)
КОНСУЛЬТИРОВАНИЕ ПО ПРОЕКТАМ
СОЗДАНИЕ ПРОТОТИПОВ
ОБУЧЕНИЕ НА МЕСТЕ
КРУГЛОСУТОЧНАЯ ПОДДЕРЖКА
