CONVEYORS
The conveyor consists of an aluminum profile frame, drive assembly, roller set, belt tracking adjustment mechanism, speed control system and support stand. It connects directly to the die cutting machine to carry film, sheets, release liner, finished parts and waste, serving as an auxiliary unit for inline die cutting production. Designed for light loads, with a typical capacity of up to 10 kg per section, it is well suited to thin materials, high-speed operation and flat, stable conveying. It offers anti-static performance and a minimal gap at the machine interface, making it suitable for cleanroom environments.
SINGLE-LAYER CONVEYOR
PRODOTTO
PANORAMICA
The single-layer conveyor carries die cut finished parts or waste directly out of the machine on a single belt. Its simple structure, lower cost, and easy commissioning and maintenance make it a good fit for single-product runs, direct feeding to downstream processes, or manual collection. It can also be combined with counting and rejection functions. For automatic stacking and separation, the double-layer conveyor is recommended.
DOUBLE-LAYER CONVEYOR (AUTOMATIC STACKING)
PRODOTTO
PANORAMICA
This conveyor uses two flat belts arranged one above the other. The first belt only transports the die cut products smoothly to the second belt, where they are stacked gradually and counted according to the preset quantity. When the preset count is reached, the second belt accelerates instantly to pull the completed stack away, creating a clear gap from the following products and enabling automatic stack separation. The separated stacks are carried to the discharge position for manual pick-up or downstream packaging. No mechanical stopper or gripper is required, so the structure stays simple, and the stacking rhythm is controlled by the counter and belt speed.
DOUBLE-BELT CLAMPING CONVEYOR
PRODOTTO
PANORAMICA
Two sets of endless belts, upper and lower, clamp the material between them for conveying. The unit features a stainless steel frame, photoelectric sensors and pneumatic pressure regulating components, with servo-synchronized drive available. The material is gripped between the belts and pulled forward by friction, without relying on a supporting plate. It is suitable for thin paper, laminated sheets, soft labels and thin adhesive parts. It prevents material from floating, arching or slipping during conveying, delivers high feeding and positioning accuracy, and is commonly used together with air-blow rejection.
VACUUM CONVEYOR
PRODOTTO
PANORAMICA
The vacuum conveyor uses negative pressure to hold products firmly in place. Vacuum holes in the belt surface draw products onto the belt, preventing shifting, lifting or sliding during conveying. It is especially suitable for thin, soft or small materials such as film, labels, paper and die cut parts. Suction strength can be adjusted to the product characteristics and process requirements, delivering stable conveying, high positioning accuracy and strong adaptability. It is widely used in die cutting, printing, inspection and automated packaging lines.
PUSHER-BAR CONVEYOR
PRODOTTO
PANORAMICA
The pusher-bar conveyor moves products along the conveying direction with pusher bars mounted on the belt at preset intervals. It separates, positions and delivers products to designated stations one by one, making it suitable for fixed-pitch conveying, automatic separation, alignment and station-to-station transfer. Its simple structure and stable operation reduce product pile-up and collisions, and it is mainly used in packaging.
Y-DIRECTION PITCH ADJUSTING CONVEYOR
PRODOTTO
PANORAMICA
The Y-direction pitch adjusting conveyor adjusts the spacing between products in the Y direction (generally the lateral direction, perpendicular to the conveying direction). By controlling the motion of the conveying mechanism, it adjusts and separates the gaps between products so that they are arranged at the preset distance, meeting the position and spacing requirements of downstream processes.
It is suitable for pitch adjustment, arrangement and station transfer of die cut products, and can work together with vision inspection, automatic collection and stacking systems to improve conveying stability and production automation efficiency.
PERSONALIZZATO
SOLUZIONI
Siamo consapevoli che ogni linea di produzione è unica. Il nostro team di ingegneri lavora a stretto contatto con voi per progettare soluzioni personalizzate di fustellatura rotativa su misura per le vostre esigenze specifiche:
- Fustellatura multistazione (che combina taglio longitudinale, laminazione e fustellatura in un’unica linea)
- Integrazione della fustellatura laser per forme complesse (nessun costo di attrezzaggio per le tirature limitate)
- Sistemi di ispezione in linea (controllo qualità 100% con telecamere di visione)
- Trattamento speciale dei materiali (eliminazione dell'elettricità statica, trattamento antiaderente, trattamento corona)
CONSULENZA PROGETTALE
PROTOTIPAZIONE
FORMAZIONE IN LOCO
ASSISTENZA 24 ORE SU 24, 7 GIORNI SU 7
